Exactpower
AC Line Voltage Regulator & Balanced Power Products

AC Line Voltage Regulator EP15A Features High power rating to weight ratio: We offer 15A of current in a 30 pound, two rack hight unit. No current limiting: We do not limit the current ever. If the current demand goes beyond 46App, then we switch output to the wall. When the current demand drops below this, we automatically switch back to regulation Tight voltage regulation: The output voltage is regulated to within 1% of 120Vrms, which is the US national standard for line voltage. Patent-pending technology: Our technology is so advanced, that we have applied for a patent and have received word that we have received a patent and the patent number is forthcoming. Subcycle waveform correction: We correct the waveform virtually instantaneously. We do not sample the waveform or wait until the next cycle for correction. We correct the waveform in real time. Wide bandwidth: Our bandwidth allows us to removes high frequency irregularities from the waveform. It is like a dynamic filter. We actively remove the aberrations, not filter them.

Improves current delivery: The nature of the technology stores the current and provides your equipment with the bursts of current that are needed in demanding audio and video systems. Low output impedance: The output impedance is significantly lower than the impedance of the power delivered by the wall receptacle. EMI and RFI filtering: Even the widest bandwidth electronics cannot eliminate all the EMI and RFI problems, therefore we have incorporated custom designed EMI and RFI filtering. Eight "full contact" AC receptacles: We looked far and wide for the best receptacles, not just the so called "audiophile grade" receptacles. We found one that has large contact areas with a tight hold. Detachable AC power cord: We decided early on that the buyer of our unit may have a favorite power cord that they wish to use. We have a standard 15A IEC connector on the rear of our unit. Vacuum fluorescent display: The beautiful blue display can be seen from across the room, so the voltage, current, or power can be monitored. Rack mount option: If you need to place this unit in a standard 19" rack, we can supply a set of brackets for this. Digital Power Amp: The insertion amplifier is a High Efficiency, pulse width modulated, power amplifier. Reduces THD over the power line: By having wide bandwidth and instantaneous correction, we automatically improve the THD of the waveform.

Balanced Power SP15A Features Oversized Custom Toroidal Transformer: Meticulously crafted transformer with electrostatic shield. Utilizing computer controlled winding machines to precisely place each winding for optimum noise rejection. High Current High Frequency Filters: Filters to remove the digital noise from connected digital equipment. Eight "full contact" AC receptacles: These receptacles are the same ones that are used in the EP15A. We use only the best Hubble receptacles. EMI and RFI filtering: Even the widest bandwidth electronics cannot eliminate all the EMI and RFI problems, therefore we have incorporated custom designed EMI and RFI filtering. (Optional)

The critical part of the SP15A is the design of the transformer. The type of transformer that is used is a toroidal transformer. This is the only type that can give the best results. The transformer must provide isolation, noise reduction, and inaudible acoustic noise. The transformer is wound with the bifilar method. This method reduces the noise that is present on both incoming "Line" and "Neutral". This noise is called "Common Mode Noise". An electrostatic shield is placed between the primary (input) side and the secondary (output) side of the transformer. This reduces noise by using a copper strip that is connected to the earth ground. High frequency noise, that is on the primary, is shunted to the shield and then to ground, so it never reaches your components. Precision winding provides for a consistent transformer. We utilize only the best materials. We have two units to choose from, a unit without the EMI and RFI filters to be used with the EP15A, and a unit with the filters to be used as a stand alone product. Although the unit with filters can be used with the EP15A, the filters would be redundant since the EP15A incorporates these filters. The SP15A also incorporates filters for digital equipment on four of the receptacles. These filters block any digital noise that may be present on the power line of a digital product from contaminating other products powered by the SP15A.

PS-Audio Power Outlets

-Benifits: - Improves depth -Enhaces soundstage -Protects from surges and spikes -Cleans the top end of any audio equipment -Video is dramatically improved -Provides isolation -Lowers the system's noise floor

PS-Audio Power Directory

The Power Director 4.7 brings a system wide level of improvement to both audio and video systems which is absolutely unparalleled in our experience. Video pictures come alive with a three dimensionality that is simply breathtaking when powered by the Director. Power amps and both analog and digital audio equipment take on a new depth and openness with a completely unrestricted level of performance that will both astound and please at the same time. Never before has there been a system wide approach with this level of performance.

-Benefits: -Prevents damage to equipment -Dramatic improvement to the sound -Enhances video clarity, black level and dimensionality -4 fully isolated zones improve separation -You can power an entire system -Dramatically lower system noise floor -Works with Pronto remote

PS-Audio Ultimate Power Cable

Combining the best power cable in the world, the Lab Cable, with our innovative balanced protection power coupler, the 20 amp High Current Ultimate Outlet, the Ultimate Lab Cable is absolutely state of the art. The Ultimate Lab is the only power cord in the world that cleans, isolates, lowers impedance, and provides 100% protection for your equipment. More cost effective than a High Current UO and two Lab Cables, this is a great way to individually isolate and protect each piece of equipment in the chain.

-Benefits: -Provides bulletproof protection so no damage can occur to your equipment -Lowers the noise floor of the system -Opens up the soundstage -Adds midbass bloom -Provides 2-way isolation -Cleans the top end of any audio system -Better clarity and resolution for -video

PS Audio P-300 & P-600 Plants

P-300
This is the piece that started the revolution in power. Winner of the Perfect Vision Magazine's Editor's choice, Stereophile's Accessory of the year, and Soundstage's! Technology Innovation awards for 2000, the P300 Power Plant stands tall as the world's first, only and finest AC regeneration device. Producing up to 300 watts, the P300 takes the AC power out of your home's wall socket and converts it first to DC, then back to AC again, only this time the AC is perfect. Fully protects all your equipment connected to it. Provides multiple waveforms that can be chosen by the user.

P-600
The P600 is our most widely used AC power regenerator. The P600 plugs into your home's AC wall socket, and then produces up to 720 watts of perfect AC power for your equipment. Your audio sounds better, your video looks better, and not just by a little bit. This medium sized AC synthesizer can handle the most demanding of loads and will provide complete protection from surges, spikes, and over voltage. In addition, the P600 comes complete with 20 different AC frequencies, and 9 MultiWave patterns, one of which is just perfect for your system.

Power Plants are revolutionary in their technology and their performance. With 8 Power Port outlets on the back, you can power everything from small to medium power amps, TV's, projectors, digital equipment, analog equipment.

Accuphase 500 & 1200 Power Line Conditioners

500

-AC voltage stabilizer based on waveform shaping technology -Superior waveform compensating power -Excellent current capability -Highly effective interference rejection -Built-in meter allows monitoring of output power, input/output voltage, and input/output distortion -Elaborate protection features -Large "Super Ring" toroidal transformer

1200

-Waveform shaping technology creates -rock-stable AC power -Highly effective waveform compensation -Ample current capability -Outstanding interference rejection -Built-in meter for mounting of output power, input/output voltage, input/output distortion -Sophisticated protection features - Large "Super Ring" toroidal transformer

Accuphase Power Line Conditioner PS-500V	$	6700.00
Accuphase Power Line Conditioner PS 1200V	$	8900.00